Set the 3nh booth in a tidy, stable position with neutral, clean surroundings, adequate airflow, and a reliable power source, and position it away from direct sunlight or mirrors. 

A light booth for color matching usually contains D65 (daylight), TL84 (store), A (incandescent) and UV light. LED may also be used in modern time for additional color matching. 

Yes, 3nh has a wide sales and service network worldwide, we provide overseas service through our authorized distributors or service partners located in Western Europe, Northern and Southern America, and the Asia-Pacific. 

A service is made up of tub replacement, light source recalibration, internal cleaning, verification of service and color certification retention so that all compliance color standards are retained. 

This refers to assessing samples with a specific color and maintaining the same alloted time interval on all parameters to ensure neutrality of variables and reproducibility of lightness in the color. 

For complete color evaluation, the CAC is commonly outfitted with D65 (daylight), TL84 (store light), F (home light), UV, and CWF (cool white fluorescent) lamps. 

The CCC is much like the CAC yet it frequently has advanced programmable lighting, sophisticated electronic control systems that allow for light source switching, and advanced visual testing.

The Colour Assessment Cabinet (CAC) is a controlled environment used for the visual evaluation of color wherein the light sources are consistent.

Assembling the light booth entails connecting the panels, fixing the light fixtures, fitting the tubes, and calibrating the lights according to our 3nh manufacturer’s instructional and safety guidelines.

Yes. However, for LED retrofitting to meet industry standards, color- calibrated LED modules must be used for accurate color rendering. We usually do not recommend customers to modify it themselves, as this can affect the accuracy of the color and cause unnecessary losses

Depending on model and location, delivery time is usually 2-4 weeks for standard models and 4-6 weeks for built- to-order ones. 

Lightbooths come in different dimensions. A typical tabletop model occupies 0.5-1 m². The bigger industrial variants take up 2-4 m².  If you have special requirements, we can customize the product according to your size

Of course. Light booths can determine the color of plastic materials, paints, and coatings used in cosmetics, leather, and even pottery. Light booths used to assess and determine precise color comparison can be used on a variety of materials.

For accurate results, install a clean and well temperature-regulated booth that is also sheltered from reflective surfaces and direct sunlight. Ambient light in the booth and the surrounding area from where the light is being viewed should not mix.

If there is uneven lighting, color shifts, and the light is not as bright as it was before, your lamps might have to be replaced. Recent light boxes used with Pantone, as well as Datacolor LightBooths, have usage timers that tell how long before a lamp needs to be replaced.

Color evaluation will change based on how a sample is viewed.  A 45° viewing angle to the source is recommended to reduce shading and achieve consistent comparison.

Light booths and color matching are essential for the textiles, printing, automotive, plastics, cosmetics, and coatings industries. These fields rely on tight color alignment to protect brand value and meet global quality demands for color. 

Every 2,000 - 3,000 hours or manufacturer recommendation to maintain consistent light and color quality.

To keep a neutral background, helping to reduce color distortion and bias.

D65, TL84, A light, CWF, and UV are the most common standardized sources used for precise color matching.